Finger Pulse Oximeter Blood Oxygen Saturation Monitor Rate Heart Adult Kids AU

1. 8 second pulse and oxygen meter check. The pulse oximeter fingertip is a compact heart rate monitor and oxygen monitor that can quickly and accurately check pulse rate and oxygen saturation. 

2. The working principle of the pulse oximeter is to pass red light and infrared light through the pulsating capillary bed, and then measure the amount of red light and infrared light emerging from the tissue through the sensor. 

3. Easy-to-read display: equipped with a large digital TFT display that displays your O2 saturation monitoring readings in large, easy-to-read numbers. 

4. Portable and easy to use: lightweight, compact structure, easy to carry and carry, can be used at home or outdoors. 

5. Health care: This oximeter can check the health of you and your family at all times, which is convenient and easy to use. 

Description: 

1. Our simple and ergonomic blood oxygen monitor fits all finger sizes, so children and adults can use it. 

2. Children Version Oximeter is a Professional design for 6 months to 12 years Kids! FDA APPROVED

Specifications:

* SpO2 : 

              Measurement range: 70% - 100%

              Resolution: ±1%

              Measurement accuracy: 80% - 99%: ±2% | 70% - 79%: ±3% | ≤69%: No definition

* Pulse Rate: 

                      Measurement range: 30 - 250bpm

                      Resolution: ±1bpm

                      Measurement accuracy: 30 - 99bpm: ±2bpm | 100 - 250bpm: ±2%

* Display:

                 Type: Digital TFT Display

                 Parameters: SpO2, PR, Pulse bar, Waveform

                 Mode: 4 display orientations (Press power button for switch display direction)

* Environmental : 

                            Operation Temperature: 5°C - 40°C

                            Storage Temperature: -20°C- 55°C

                            Operation Humidity: ≤80%, no condensation

                            Storage Humidity: ≤93%, no condensation

                            Atmosphere pressure: 86kPa - 106kPa

* Measurement Performance in Low Perfusion Condition :

Required the test equipment (BIO-TEK INDEX Pulse Oximeter tester) the pulse wave is available without failure when the simulation pulse wave amplitude is at 0.6%.

* Interference Resistance Capacity against Ambient Light :

The device works normally when mixed noise is produced by the BIO-TEK INDEX Pulse Oximeter tester.

How To Use:

Turn the Pulse Oximeter on, put one of your fingers into the silicone hole of the oximeter. Then release the clamp, press the button, oximeter will go into the working state. The oximeter will automatically fall into standby or sleep mode after 8s seconds without a finger in it.

Special note: The screen of this product has a protective film, which can be peeled off carefully with fingernails, fine needles, and toothpicks. It is not a scratch problem. Thank you!

Package Included:

Option1: 1*Blue Fingertip Pulse Oximeter (For adult)

Option2: 1*Blue Children Fingertip Pulse Oximeter (Professional designed For 6 months to 12 years Kids)

Option3: 1*Yellow Children Fingertip Pulse Oximeter (Professional designed For 6 months to 12 years Kids)

Notes:

1. There could be some deviations due to manual measurement or slight color differences owing to photographing conditions. Thank you for your understanding.

2. Do not operate the unit if it is damp or wet because of condensation or spill. Avoid using the equipment immediately after moving it from a cold environment to a warm, humid location.

3. Fingernail polish or fake fingernails may cause inaccurate SpO2 readings.

4. SpO2 measurements may be adversely affected in the presence of high ambient light. Cover the sensor area from direct sunlight (with a towel, for example) if necessary.

5. If there are any problems, please contact our store in time. We will give you a satisfactory solution.